|
|
This will be fun. I didnt even take this one apart and I’m going to tell you how to do it. If I get something wrong, could the person who did take it apart correct me? If you do make a big deal about it, because I am rarely wrong…
Here we go!
There are screws all over this camera, so make sure you take the time and remove them all before you try to take the covers off!
These are both covers.
This is a section of cover from the side of the camera, take it off!
Here it is, the inside of a camera, now, since this is a sensitive device, be careful!
When you remove the magical glowing screws shown above, and disconnect the clip (which is also glowing magically and has its very own arrow!)
Now you can fold the screen down, like so.
More screws. Lose em. Also watch out for the clip, as shown by the arrow.
Look! Another arrow! Watch the circled clip. You dont want to bend or break anything!
Now be careful and disconnect all of the ribbon cables.
On the front, you will notice more ribbon cables, disconnect ‘em. If you dont know how, look below. If you do, pat yourself on the back and buy yourself a soda, you’ve earned it.
By now you should have totally disconnected the lens from the rest of the body.
On the back, there are more screws holding ribbons in place, so go wild, and unscrew them.
You can remove the base plate, but be careful, and watch for any screws!
More screws to remove, and another clip.
Remove the screw noted above.
Look at what this arrow is pointing to and use your best judgement as to what to do here.
Find the hidden arrow, win a prize! The prize is advancement to the next step. Yippee!
Good Work, this was a tough one.
