Comments on: Nokia e61

By: Dickcheney

Dickcheney — Sun, 30 Mar 2008 01:29:12 +0000

COOL. That Phone looks alot like a black berry

By: George

George — Fri, 04 Jan 2008 20:51:39 +0000

Thank you for your help
All of the screws are T-6, the other size (the lower one holding the display)is a T-4

The instructions above dont tell you very well that the connector holding the display is very small, and is on the left side of the display when looking at it. Be Gentle and pry with your fingernail (rocking back and forth) and it comes off in one piece (square + Ribbon + Dispay). It is the square portion and has the small ribbon connector from it to the display. Dont try to remove the center piece (chrome in color).

I was fortunate to have been given a E61 and swapped the case and display from a E62 I have. Now I have a faster device and was able to swap displays as the E61’s was a little scratched.

By: garwood

garwood — Thu, 27 Dec 2007 04:08:08 +0000

how and where can i replace the mic. got the mic.

By: deviruz

deviruz — Sat, 15 Dec 2007 05:08:17 +0000

just an ordinary change in housing…it should not like this….i agree with lame man…

By: ADUGNA HUNDRRA

ADUGNA HUNDRRA — Tue, 24 Apr 2007 12:12:10 +0000

Please send me amobile aparatus by this adrese

Adugna Hundera Biru
Debrezeit Agricultural Research Center

Po.Box 32
Debrezeit,Ethiopia

By: hans

hans — Sat, 21 Apr 2007 11:15:37 +0000

Thanks a lot, you helped me!

By: Kimble

Kimble — Fri, 05 Jan 2007 13:47:15 +0000

dan, yep the lcd inside is not glued or anything. Simply disconnect lcd connector, remove those 2 screws on the screen frame, take lcd apart from the frame.

By: Amer

Amer — Sun, 31 Dec 2006 12:13:02 +0000

I got the same problem as Dan could anyone help in this matter plz? i got dust + couple of scratches.

By: dan

dan — Fri, 10 Nov 2006 06:32:59 +0000

got dust inside the display. anybody knows if screen can be taken off lcd display to clean?

By: gsm parts

gsm parts — Thu, 09 Nov 2006 12:07:28 +0000

maybe you can also show the people how to remove the display, this is pretty easy if you know how to do it,if not you can break some plastic parts of it.and also how to take out the print ad parts like the speaker,mic and vibration device